Verizon Wireless secret codes

Verizon Wireless secret codes

To reset phone to factory settings ##1133

If you want to receive a text about how many minutes you've used #MINor #646

Access your voice mail VMor 86

Report drunk driver, great for real or prank on friends DUI (384)

To hook up call forwarding 72and 10 digit number

Make it go away 73.

Get rid of caller ID so people only know Unavailable is calling them 67and 10 digit number

Overpay for directory information 411

Reach customer support611

Coast Guard Boater's Assistance...

don't try in Midwest dumbassCG (24)

To access Voice Mail or Calls Number that have been forwarded to you VM (86)

Read more »

Tips & Tricks for Symbians!

Tips & Tricks for Symbians!

Tip 1 : Do u know how to use the edit button (abc or pencil button)?
Heres how... in the inbox for example; u wanna delete multiple sms, simply hold the edit button, scroll down, and then, press c to delete the marked sms. The edit button can also b used to copy and past text in sms, simply hold it and scroll across, choose copy. pretty good for placing song names in ngages
Tip 2 : Shit happens, on a smartphone, its inevitable u do something wrong, and tis calls for a format of fone. to format the fone, press *#7370#, then enter the lock code, which is the sec code of the fone. NOTE: batt must b full, else if format is disrupted by low batt, consequences will b disatrous
I heard the code *#7780# works too, pretty much the same i tink.
for 6600 users, to format the fone, theres an alternative way. Press and hold <3>, <*>, and the buttons, then power on fone, keep holding on the 3 buttons, till u come to a format screen. tis method ONLY works on 6600, and need not enter the sec code. BUT sec code wun be reset to default 12345.
Tip 3 : TO NGAGE USERS; Did u know u can install .sis files simply using the cable given? Juz plug it in, place the .sis file anywhere on e: (the mmc), not in any folders, root of e:, disconnect, then look for it in manager.

Tip 4: Save on battery and system memory being used by regulary checking the task manager which can be accessed by holding down the menu button!!
Tip 5: Type *#06# to display your IMEI serial number, very valuable for the unlocking your phone to other sim cards
Tip 6: Type *#0000# to view which firmware version you are running
Tip 4a: Set the screen saver to a short time out period to prolong battery life.
Tip 4b: Avoid restarting the phone, or repeatedly turning it on and off. This helps increase battery life.
Tip 7: If you would like to avoid being "blue jacked", keep bluetooth turned off, or set your phone's visibility to hidden.
Tip 8: Don't want to carry a watch and a phone? Set the screen saver to show date and time, then you can ditch the watch.
Tip 9: Save memory when installing apps, by installing over bluetooth. This can be done using the nokia phone suite and a bluetooth serial connection. Only works with .SIS files, so java still has to be sent to the phone, but will save space when using .SIS files.
Tip 10: Operator logos
Use a filemanager like FExplorer or SeleQ to add the folders: "c:/system/Apps/phone/oplogo". Add a .bmp picture to folder "oplogo" and restart your phone! The .bmp picture size needs to be: 97 x 25 pixels
Tip 11: Check if the recepients phone is on
Delivery reports
or
Type *0# your message in the message composer window space then write your message, the recipient will not see the star zero hash bit - just the message When they read it it will relay a message back to your fone showing the time they recieved it. (haven't yet tried it myself though)
Tip 12: BlueJacking
First up, you need to know what Bluetooth is. There are lots of types of modern devices that incorporate Bluetooth as one of their many features. PDAs, mobile phones and laptops are a few of these modern devices. Bluetooth means that Bluetooth enabled devices can send things like phonebook/address book contacts, pictures & notes to other Bluetooth enabled devices wirelessly over a range of about 10 metres. So, we've got past the boring part. Now, using a phone with Bluetooth, you can create a phonebook contact and write a message, eg. 'Hello, you've been bluejacked', in the 'Name' field. Then you can search for other phones with Bluetooth and send that phonebook contact to them. On their phone, a message will popup saying "'Hello, you've been bluejacked' has just been received by Bluetooth" or something along those lines. For most 'victims' they will have no idea as to how the message appeared on their phone.

Tip 13: While you are viewing a picture in your phone's gallery, press one of these shortcut keys (definitely works on 6600, not sure about other symbians)
1 - turn image anticlockwise
3 - turn image clockwise
* - toggle on/off of full screen
5 - zoom in
0 - zoom out
#15 u can select all files in a folder by selecting THE folder and copy it then paste it somewhere. however u need to make a new directory. fexplorer wun let u copy that folder together. well seleQ can mark files to copy but it really takes time!
#16: A soft and Hard reset
A Soft-reset - the process of resetting all the settings of the phone to the factory default! No applications are deleted! A Hard-reset is like formatting a drive! It does format the memory. Everything that has been installed after the first use of the phone is deleted! It will recover the memory of the phone to the state you purchased it! It is done by inputing the following code: *#7370# NOTE: The battery must be full or the charger has to be connected to the phone so that it does not run out of power and make the phone unusable.
#17: Formats of images
supported ones: JPG UPF GIF87a/89a WBMB MBM TIFF/F PNG EXIF
How to copy & paste text in your Nokia 3650:
Press and hold the pencil key and select your text using the scroll key.
Left function key will change to 'Copy'. Press it to copy the selected text to clipboard.
You can paste the clipboard contents the same way:
press and hold the pencil key and press 'Paste'. Or, press pencil key once and select 'Paste'.
Press and hold the Menu key to open the application switching window, where you can *duh* switch between applications.
If a program hangs and you can't shut it down, select the application in the
application switching window and press 'C' to kill it. It's also a faster way to exit programs.
Turn on/off the "click" sound made by the camera by selecting the 'Silent' profile or by turning warning tones on/off:
Menu > Profiles > "select your activated profile" > Personalise > Warning tones > On/Off.
(This also effects the sound of Java games and apps).
To change background image go to:
Menu > Tools > Settings > Phone > Standby mode > Background image > Yes > "choose an image".
The best size for background images is 174x132 pixels.
Only got blue, green and purple in your 3650 colour palette?
This free app adds 3 more colours: Palette Extender.
Display an image when someone's calling:
Menu > Contacts > "select a contact card" > Options > Edit > Options > Add thumbnail > "choose an image".
Add a personal ringing tone to a contact:
Menu > Contacts > "select a contact card" > Options > Open > Options > Ringing tone > "choose a ringing tone".
Delete all messages from your Inbox at once:
Menu > Messaging > Inbox > Options > Mark/Unmark > Mark all > Options > Delete.
Send or hide your caller ID: Go to: Menu > Tools > Settings > Call > Send My
Caller ID > 'Yes', 'No' or 'Set By Network' to follow the default settings of your home network.
If you often copy large files to your MultiMedia Card, I recommend a card reader.
E.g. With a card reader it takes only 12 seconds to copy a 10 MB file!
Record the sound of a phone call using the (sound) Recorder.
Menu > Extra's > Recorder > Options > Record sound clip.
Note: short beeps are audible during call registration.
But there is a 60 second limitation so if you want unlimited sound recording get this app: Extended Recorder.
While writing text, press "#" to switch between upper and lower case and Dictonary on/off (predictive text input).
Press and hold "#" to switch between Alpha mode and Number mode.
Keyboard shortcuts for zooming and rotating images in Images:
1 = zoom in, 0 = zoom out, press and hold to return to the normal view.
2 = rotate anticlockwise, 9 = rotate clockwise, * = full screen.
In standby mode, press and hold the right soft key to activate voice dialling.
To add a voice tag to a phone number, open a contact card and scroll to the phone number and select:
Options > Add voice tag.
You can customize both soft keys located below the screen (in standby mode):
Menu > Tools > Settings > Phone > Standby mode > Left/Right selection key > "select an application".
In standby mode. press scroll key center (joystick) to go directly to Contacts.
In standby mode, press and hold 0 to launch your wap home page.
In Menu or any subfolder, press numbers 1 - 9 to start the application at that location.
123
456
789
In standby mode,
45# + dials the number on your sim in memory slot 45.
50# + dials slot 50 and so on.
If you have your keylock activated just press the on/off button to turn on your backlight
to look at the time when it's dark without having to unlock the keypad.
Never, ever, in your whole life, install WildSkinz on your Nokia 3650!!! WildSkinz screws up
the whole 3650 system. It was never intended to work on the 3650, only on the 7650.


Why assigning Video Recorder in the right or left soft key does not work?

(Sound Recorder is launched instead of Video Recorder)
It's a bug with firmware version 2.50.

How to check your firmware version:

A "Firmware" is the phone's operating system stored in internal Flash memory of the device (disk Z.
Manufacturers release new firmware versions containing bug fixes, improvements and - sometimes - offering new functions.
Firmware upgrade can only be made in authorized Nokia service centre (point).
To check your current firmware version simply type *#0000# on main Phone screen.

·

How to check your IMEI (International Mobile Equipment Identity)?

Type *#06# on main Phone screen.



Start up in Safe Mode so no 'auto start' apps will be running:

To make sure that no memory-resident programs start when you reboot your phone,
hold down the pencil key when you turn on the phone and hold it on untill you have to enter your PIN code.
(When you have trouble booting up the phone with the MMC in it because it got corrupted for some reason, this trick will
almost always let you boot up the phone so you can remove the latest installed app which might have caused the
problem or if your phone is "unrepairable" you can still back up your important data before you do a format.)

Q: How to totally format your Nokia 3650 and remove all installed applications, user files and restore all
settings to default like it's new out of the box? (OEM apps won't be deleted like Camera and RealOne Player).

A: First Format your MMC: Menu > Extras > Memory > Options > Format mem. card > Yes.
Note: It is very important to format your MMC before you format your phone!
Then format your phone by typing *#7370# on main Phone screen.
Phone will ask: "Restore all original phone settings? Phone will restart." Press 'Yes' and enter your Lock code (default is 12345).
Tip: Formatting takes several minutes so you'd better connect your Nokia 3650
to a charger to ensure that your battery doesn't get empty in the middle of formatting.
Note: All your created acces points and mailboxes will be lost so take a note of them. And all application settings will be reset.
E.g. In Camera, image quality is set back to normal and memory in use is set back to phone memory. And also in Messages,
memory in use is set back to phone memory, etc. Also backup your contacts with PC Suite or a program like Contacts Manager.


To reset your wallet, should you forget your code,
Type in:
*#7370925538#
this will reset the wallet code, the wallet contents will be deleted.
-------------------------------------------------------------------------------------------

How to free more RAM on your phone >>>


>>> Method 1: Flight mode:
Put your phone in "Flight mode" with Psiloc System Tools. Install System Tools, open it and select "Flight mode". This way you can restart the phone without your SIM card so there will be no running phone tasks in the background. Now you can have up to 3,5 MB of free RAM!

Note: ironically enough, Flight mode doesn't work when Smart Launcher is installed, at least in my case.
But i've also heard several reports of people who have both apps running without any problems.




>>> Method 2: Smart Launcher trick:
Install Smart Launcher and open it. Go to Options, Settings and put Launcher ON.
Now plug in your charger and switch off your phone. Wait untill the battery meter appears and short press the Menu button (don't hold).
The menu should appear and now you can have 3,5 to 4,5 MB free RAM! (Hold Menu button to check RAM).

The trick is that with the charger plugged in, the phone must get a minimum software support for charging, even when
the phone is switched off. And somehow Smart Launcher has still got it's shortcut running and that's the Menu button. So when
you press the Menu button, you go directly to the Menu without any other phone tasks running in the background so
you trick the phone and you have more free RAM!
Note: when you unplug the charger, the phone will switch off.

>>> Method 3: Menu :
This method I found it by myself, it frees a little about 100~200 KB but I guess it's useful sometime

Close your menu not by selecting the right selection key "exit", or pressing the menu key another time, they only hide the menu app but do not close it, to close it select the left selection key "option" and scroll down and select "exit"

So when you open an app needs more ram reopen menu and close it, it's useful when play low bit rate video in realplayer paradis.

Read more »

T-Mobile Secret Codes

To get through to customer services, dial 150, then press send. As soon as the call is active, press options, then select send dtmf. Now type in 150, then press ok. you should hear 3 beebs, and a second or two later, you'll get put through for free.

Ever deleted your voicemail number? If on T-Mobile, dial *#67# send, it will show your voicemail number.

Press #225# then send to check your credit balance. Press *#646# then send to check minutes used.

#646# will show a T-mobile user how many minutes used and remaining also the date of bill close. #674# does the same thing for texts.

On Hungarian T-Mobile you can see your own number by typing *121#.

On any T-Mobile phone you can dial +16111 and then the number you are calling to call out for free. It's great when your out of time on prepaid. You'll hear a female voice saying something like your call can't be completed. Hang up and immediately call back, (not tested, report if it's not working).

On T-mobile to get your account balance call #999#.

Read more »

Orange Secret Codes

Dial *133# on Orange to view your credit balance.

Orange UK voicemail number is 07973100123

By typing *146# and pressing yes on Orange phones will give you the expiry date of your voucher card.

Only on Orange prepaid in India, press *121*022# and then press call button ....a message will be displayed ....click end call button ....wait for a few seconds and you will get call from your own number! Don't pick the call otherwise it will cost you !

On Orange India, to call on your own phone or while roaming from other network type *121*phonenumber# and call you will get through you can even call yourself !

Read more »

Vodafone Secret Codes

To send an SMS to a fax machine (vodafone) put 9741 then the fax number then send. You'll get a confirmation text about 5 mins. later.

If you key #104# and press call you will get a number beginning with 44 replace that 44 with 0 then dial the rest of that number into any phone - it's a direct line to your voicemail you can even divert calls to it.

Get through to customer services free by dialling 1611.

For Vodafone UK users, if you press #105# then call you can check the status of when your account was last updated.

To know where the nearest transmitter in your area, press: #102# and call. If not works try: #105# (Vodafone).

Type #147# to display the last number that called with the time and date of the call as well when phone was on/off. . !

On portuguese Vodafone call 1799 to receive a message with your credit balance, call #100# to the same thing, call #102# to see your last call, #103# gives you the time and date Vodafone, quick scratch card top-up, type #1345 topup card number# and you will see your new balance on your display!

If you press #1345# you can see your balance on screen.

Type #31# / #30# or #102# to get the price duration and number of your last call.

Cell broadcast: 050 to display local area code and postcode.

Free voicemailing! Call 70612 and enter your phone number and voice mail password.

Read more »

Mitsubishi mobiles secret codes

*#0000# - to reset the phones menu-language to natural language, set initially by the distributor.

*#06# - for checking the IMEI (International Mobile Equipment Identity)

hold * then 5806 - Show Software Version

hold * then 5807 - A little bit different

hold * then 5472 - Testmode for datacable (it seems so)

hold * then 4329 - Activate and deactivate NETMONITOR

hold * then 621342 - Activate and deactivate another NETMONITOR

hold * then 3926 - shutdown


SP lock
You can turn around the lock routin by entering **04*PIN*PIN*PIN# now the secretcode change was applied and the software turns back to main menue. It works not on all triums, only on thos with older Sofware Versions.

Read more »

GSM mobiles secret codes

Type *#61# and press call - Check redirection status. Cancel all redirections: ##002#, *43# to activate call waiting, to deactivate #43#.

If your phone doesn't have incoming call barring and outgoing call barring, You can try this.

For outgoing call barring dial *33*barcode*# and pres OK. To deactivate it dial #33#barcode*#.

On any phone, on any network type in **43# to enable conference calls. You can make up to 7 calls at once.

If you need to block SMS reception (if you are spammed by someone) just press this code, *35*xxxx*16#xxxx is your Call Barring code (default is 0000).

To remove this barring type #35*xxxx#. If you want to hide/show your phone number when calling, put one of these codes below in front of the number that you are going to call. (*#30# / *#31# or *31# / #31#) Works on some networks.

Typing *0# or *nm# on the beginning of a text message gives you detailed delivery report on some networks. But turn off reports in message settings first.

When the sim card-PIN blocked type **042*PIN2 old*newPIN2*newPIN2*.

To hide Your number while texting (only 02 network in Nokia phone) go to the messages menu select create e-mail, it will ask for an e-mail address, enter t@t, enter a subject, write the message then send. It will ask e-mail server number, enter the number of your friend and send!

When roaming, type *#111*# or *#111# to call home abroad.

Read more »

Bosch mobiles secret codes

*#3262255*8378# (*#DANCALL*TEST#) - to make secret Engineering menu (menu 10) appear.

10. - Engineering
10.1 - MS Info
10.1.1 - on
10.1.2 - off
10.2 - Software details
10.2.1 - Software version
10.2.2 - EEPROM version
10.2 - Test / Production details
10.3.1 - Hardware data
10.3.2 - Production data
10.3.3 - Service data
10.3.4 - Mechanical data

*#06# - to display the IMEI (International Mobile Equipment Identity)

*#0000# - to set the language automaticaly (Reset to English)

*#3370# - to set the Enhaced Full Rate

#3370# - to Reset the phone

*#9000# - to enter SIM lock code

*#9001# - To enter the corporate code (Bosch 908)

*#9002# - To enter the provider code (Bosch 908)

*#9003# - to enter the network code

*#9004# - to enter the subset code

*#9100# - to remove the SIM lock permanently

*#9101# - to remove the corporate lock permanently

*#9102# - to remove the provider lock permanently

*#9103# - to remove the network lock permanently

*#9104# - to remove the subset lock permanently

SIM-lock is NOT the SP-lock / Service Provider lock. . !

Read more »

Secret codes for SIEMENS mobiles

SIEMENS S1 / S3 / S3 COM / S4

To view the software date and else with S3 com, S4, S4Power
press with SIM removed *#06# and left softkey.

To view some other stuff with S4Power
press with SIM removed *#06# and left softkey twice.

To view the software date with S3 com, S4, S4Power
press with SIM installed menu 98 and left softkey twice.

ACTIVATE MONITOR MODE

Siemens S1/S3

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key),
5553756, HangUp Button (Red HandSet key)

Siemens S3 COM/S4

Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button
(left MENU key), 7684666, HangUp Button (Red HandSet key)

Note: Now Monitor should appear at the bottom of the Network Options menu.

MONITOR MODE

Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Pressing the right Display Button when in monitor mode will show a
list of the six cells with the strongest signals.

Test Mode Indicators: (* = only available when call in progress )

CH Channel Number

RX Signal Strength (dB)

N NCC (Colour Code)

B BCC (Colour Code)

CI Cell ID (in Hex)

C1+ How long before phone does forced hand over.(see RX and RXAM)

LAI Location Area Identity. Display Network ID code(42F010 = 240.01) and MSC

TXPWR Transmit Power (dB)

RXAM Receive signal strength cut-off point

TS* Time Slot Number

TA* Timing Advance. Distance from tower in Km X 2

PL* Power Level
SIEMENS S1

Here's a trick to play Tetris, also known as Klotz on a Siemens S1.
Turn the phone on. Enter PIN. Before the telephone has logged in to the
your GSM net do the following steps.

1: Choose F 9 (function settings)
2: Choose send own number and push the right button for choose.
3: Push 9

USE 2 as < and 8 as > , rotate the klotz with 5 and drop with 4.

I have just heard from one of the programmers of the phone that Tetris
was in the phone during development, but it was removed before it was produced.
Apparantly someone has the patent on games in mobile phones and Siemens
didn't want to pay the licensing fees. It was either in Menu F-9-9 or it's not there at all.

Siemens C 25
Secret Codes

SP unlock *#0003*(secret code 8 digits)#

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button

Pin Out

1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO

Siemens S1

Secret Codes

SP unlock *#0003*(secret code 8 digits)#

*#06# for checking the IMEI (International Mobile Equipment Identity)

Tetris
Power on phone and enter PIN. before phone has locked onto network, F9, send own number, hit right button, hit 9. left is 2, right is 8, rotate is 5, and drop is 4.

Monitor Mode
1. Menu
2. 9 (Phone Options)
3. 7 (Phone Status)
4. Left Display Button (left MENU key)
5. 5553756
6. HangUp Button (Red HandSet key)

Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress )

CH Channel Number
RX Signal Strength (dB)
N NCC (Color Code)
B BCC (Color Code)
CI Cell ID (in Hex)
C1+ how long before phone does forced hand over. (see RX and RXAM)
LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Reeceive signal strength cut-off point
TS* Time Slot Number
TA* Timing Advance. Distance from tower in Km * 2
PL* Power Level

Power Table
PL: 5 6 7 8 9 10 11 12 13 14 15
dB: 33 31 29 27 25 23 21 19 17 15 13
Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02

LF* C1 value with continuous transmisson from tower
LS* C1 Value with discontinuous tranmission from tower
QF* Bit Error Rate with continuous transmission from tower
QS* Bit Error Rate with discontinuous transmission from tower

BER (bit error rate) table
QF/QS register: 0 1 2 3 4 5 6 7
% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6

Tips and tricks

Nice Sunset in the display. Siemens S3 or younger
In the Telephone Book in the section own numbers, first position you have to type in +12022243121 (Number of the Capitol in Washington DC) and save it without a name. Then open this telephone book again do so as you like to change the number but leave the modus without changing anything. A nice Sundown will be shown in the display.

Pin Out

1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO

Siemens S3 S3 comfort

Secret Codes

SP unlock *#0003*(secret code 8 digits)#

*#06# for checking the IMEI (International Mobile Equipment Identity)

Tetris
Power on phone and enter PIN. before phone has locked onto network, F9, send own number, hit right button, hit 9. left is 2, right is 8, rotate is 5, and drop is 4.

Monitor Mode
1. Menu
2. 9 (Phone Options)
3. 7 (Phone Status)
4. Left Display Button (left MENU key)
5. 5553756
6. HangUp Button (Red HandSet key)

Now "Monitor" should appear at the bottom of the Network Options menu. Pressing the right Display Button when in monitor mode will show a list of the six cells with the strongest signals. Test Mode Indicators: (* = only available when call in progress )

CH Channel Number
RX Signal Strength (dB)
N NCC (Color Code)
B BCC (Color Code)
CI Cell ID (in Hex)
C1+ how long before phone does forced hand over. (see RX and RXAM)
LAI Location Area Identity. Display Network ID code (42F010 = 240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Reeceive signal strength cut-off point
TS* Time Slot Number
TA* Timing Advance. Distance from tower in Km * 2
PL* Power Level

Power Table
PL: 5 6 7 8 9 10 11 12 13 14 15
dB: 33 31 29 27 25 23 21 19 17 15 13
Watts: 2 1.3 .8 .5 .3 .2 .13 .08 .05 .03 .02

LF* C1 value with continuous transmisson from tower
LS* C1 Value with discontinuous tranmission from tower
QF* Bit Error Rate with continuous transmission from tower
QS* Bit Error Rate with discontinuous transmission from tower

BER (bit error rate) table
QF/QS register: 0 1 2 3 4 5 6 7
% of bit sent: 0.2 0.8 0.4 1.6 3.2 6.4 12.8 25.6

Unlock Siemens S3(Not S3 COM)
(For advanced users only)

At addresses 0D8 to 0DD the phones code is stored. To read the code swap nibbles stored at addresses from 0DA to 0DD. Error counter is at 0D9. To clear the Phone Code write at addresses from 0D8 to 0DD: 00, 00, FF, FF, FF, FF.

Siemens S3 comfort

Show IMEI code: * # 06 #

MONITOR MODE
The Siemens S3 Com series have a Monitor mode that can be activated directly from the standard user keypad. In order to activate this mode, you must enter the special access code currently programmed into the phone.

TO ACTIVATE MONITOR MODE
1. Turn the phone on.
2. Enter the PIN access code on press OK. (Only if is enabled).
3. Press Menu. (Left top button).
4. Press 9. (Phone Options).
5. Press 8. (Phone Status) (May be button 7 in some phones).
6. You may see your IMEI Number
7. Left Display Button (Top left MENU key).
8. 7684666
9. HangUp Button. (Red HandSet key).

Note: Monitor should appear now at the bottom of the Network Options menu.

MONITOR MODE TOGGLE
Pressing the right Display Button when in monitor mode will toggle into 1 and 2 modes

Tips and tricks

Nice Sunset in the display. Siemens S3 or younger
In the Telephone Book in the section own numbers, first position you have to type in +12022243121 (Number of the Capitol in Washington DC) and save it without a name. Then open this telephone book again do so as you like to change the number but leave the modus without changing anything. A nice Sundown will be shown in the display.

Pin Out

1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO

Read more »

Secret codes for Sagem mobiles

Secret Codes

MC959

in main menu press * for hot-menu:
lcd, led, vibra, tests, imei, software versions, battery voltage

Type MENU - 5 - 1 - 1 - # to enter Engineering menu on SAGEM (RC-712, 721, 815 and 815 plus) phones.

Secret Codes

*# Commands
*#06# IMEI number
*#30# followed by send - Corresp. ID incoming displayed
*#31# followed by send - Your ID. outgoing displayed
*#33# followed by send - Call barr inactive
*#35# followed by send - Call barr inactive
*#43# followed by send - Call Waiting
*#100# followed by send - Your mobile number
*#101# followed by send - DHLRU1 ?meaning?
*#102# followed by send - Transmitter information
*#103# followed by send - Current date and time
*#147# followed by send - Last caller's number
*#1345# followed by send - Call credit and service time left

Hidden menu
Engage one of the menus with the scroller then press *
Appli menu: option 1 Version, option 1 Battery
Prom menu: option 1 IMEI number
Sim lock: option 1 Sim lock - press okay for 30 second countdown, C button to cancel (caution with this I don't know what happens when the counter reaches 0!!, it may lock up your telephone's SIM card.
Network: option 1 Option not available
Test LCD: option 1 Symbol 1 Tests screen, option 2 Symbol 2 Tests screen, option 3 Black Tests screen, option 4 For photo Tests screen, option 5 Tests the vibrator

Read more »

Secret codes for Sharp mobiles

Sharp Secret Codes

*01763*8371# (*01763*VER0#) --- Firmware Version.

*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode hold pwr key to leave then disable.

*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode.

*01763*8781# (*01763*TST1#) --- Test #1 (test early wdt looping to dump, need to remove battery from phone)

*01763*8782# (*01763*TST2#) --- Test #2 (test irq dis looping to switch, resets itself)

*01763*8783# (*01763*TST3#) --- Test #3

*01763*8784# (*01763*TST4#) --- Test #4

*01763*8785# (*01763*TST5#) --- Test #5

*01763*87872# (*01763*TST72#) --- Test #7

*01763*8788# (*01763*TST8#) --- Test #8

*01763*5640# (*01763*LOG0#) --- Disable LOG

*01763*5641# (*01763*LOG1#) --- Enable LOG

*01763*4634# (*01763*IMEI#) --- IMEI

*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)

*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu) (go to
settings,security,meplocks select insert handset code,default is 0000, allows to check lock status and disable locks only if u have correct code dont try guessing!!)

*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode

*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode

Read more »

SECRET CODES FOR NOKIA 30 SERIES

                                               CODES FOR NOKIA 30 SERIES

         
                                               Nokia 3110 Secret Codes

Unlock your Nokia
To unlock your Nokia phone you will need some of the following:
1. Data Cable
2. Unlock Software
3. Extra Help + help Guides

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#7780# restores Factory Settings..(Memory, language, counters not included)

*#3110# for checking the phone's software (SW) - called firmware revision information.
*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#] Phone asks 'warranty code:'

Press the following warranty code:

6232 (OK) : Displays the Month and Year of Manufacture (0997)
7332 (OK) : Displays the date of the last repair - if found ('DATE NOT SAVED'...)
7832 (OK) : Displays (if found) the date where the phone was purchased ('DATE NOT SAVED'...)
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another
(e.g. if broken) with 6110 u can transfer all data via IRport. (Confirm Transfer?)

'Fast silent mode'.
In the newer versions (v.7.11->) a quick silent mode can by entered.
Press Menu then #.

The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.




                                             Nokia 3210 Secret Codes

Unlock your Nokia
To unlock your Nokia phone you will need some of the following:
1. Data Cable
2. Unlock Software
3. Extra Help + help Guides

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

Sim Clock Stop : *#746025625# apparently only works for 3 minuts.


*#92702689# - takes you to a secret menu with 6 choices
1) shows the serial nr.
2) shows when the cel phone was made mmyy
3) shows when the the cel. phone was purchased mmyy
4) shows how many times the cel. phone has been repaired.
5) makes u capebel of transferring user data if u have the gear for it
6) shows how many houres the phone has been on





                                                  Nokia 3310 Secret Codes

Unlock your Nokia
To unlock your Nokia phone you will need some of the following:
1. Data Cable
2. Unlock Software
3. Extra Help + help Guides



Enhanced Full Rate
For activation enter *#3370#
For deactivation enter *#3370*
In both cases the phone will automatically restart.


Firmware check
*#682371158412125#


Service codes
*#0000# or *#9999# (Not Tested)
1st Line - Software Version
2nd Line - Date of Software release
3rd Line - Phone Type.


*#92702689# or *#92772689# Display the phone's software version.


SIM Clock Stop
*#746025625#




                                                Nokia 3330 Secret Codes

Unlock your Nokia
To unlock your Nokia phone you will need some of the following:
1. Data Cable
2. Unlock Software
3. Extra Help + help Guides




Imei Information

To view the imei number on this model simply type *#06#

*#170602112302# shows the SW version.


Service Provider Lock
Service Provider lock is the lock to your phone which is implement by your service provider e.g. Orange onto your sim card.

The phone is usually locked to a certain SP but it can be unlocked allowing you access to other service providers that provide a better deal.


The same effect can also be used by using a Dual sim, you could have two sim cards in one phone allowing you to switch between sims and SP

1. First sim = Orange
2. Second sim = One2One

SMSC (Short Message Serivce Centre Numbers)
SMS Centre number allow you to send free sms, by changing your message centre number like this:

1. Go to messages
2. Message Settings
3. Set 1
4. Message Centre Number
5. Then change the number to one from SMSC Number section


Codes
*#war0anty# - Warranty
This will show your warrnty details *#92702689#
*3370#
Basically increases the quality of calling sound, but decreases battery length.


#3370#
Deactivates the above.


*#0000#
Shows your software version.


*#06#
Shows your IMEI number.


*#sim0clock#
This shows if your phone will allow simclock stoppage.


*4370#
Half Rate Codec activation. It will automatically restart

#4370#
Half Rate Codec deactivation. It will automatically restart

*3001#12345# (TDMA phones only)
This will put your phone into programming mode, and you'll be presented with the programming menu.2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours, ask your local dealer for it.
8) Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US. Ask on the forum for any other codes.
12) Power down the phone and power it back on again

ISDN Code
To check the ISDN number on your nokia use this code *#92772689#

Restore Factory Settings
To do this simply use this code *#7780#

Manufacturer Info
Date of Manufacturing *#3283#




                                             Nokia 3810 Secret Codes

Unlock your Nokia
To unlock your Nokia phone you will need some of the following:
1. Data Cable
2. Unlock Software
3. Extra Help + help Guides

*#06# To view IMEI number

*#3810# To view software version
 ========================================

Read more »

Nokia 16xx 2xxx 3xxx, 6xxx 7xxx 8xxx 9xxx secret codes

Nokia 1610/1611, 2010, 3210, 3810, 6080/6081, 6120/6160/6162, 6150, 6190, 7110, 8850, 9000/9000i, 9110




Nokia 1610 / 1611

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#170602112302# shows the SW version.

Latest software version on Nokia 1610: v 5.15 (25.02.97) NHE-5NX - older version V 4.19
Latest software version on Nokia 1611: V 4.03 NHE-5SX

Nokia 2010

To view IMEI number *#06#
To view Software Version enter *#9999#

Nokia 3210

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP


TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

*#0000# To view Software Version.

#746025625# [*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: V 5.02 NSE-8/9

V.4.41 NSE-8/9 (17-08-99)0
V 4.11 (???)
V 3.10 NSE-8

*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Nokia 3810

To view IMEI number *#06#
To view Software Version enter *#3810#

Nokia 6080 / 6081

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version on 6080 V 4.80 NHE-2
Latest software version on 6081 V 5.14 NHE-2A

Nokia 6120 / 6160 / 6162 (TDMA phones)

*#92772689# for checking ISDN number.
*3001#12345# for field test mode and nam selection and some other stuff...
*#9999# shows the SW version.

Nokia 6150

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#92702689# to enter service menu.

Latest software version 5.22 (10-11-99) NSM-1

Older versions:
5.20 (20-09-99) NSM-1
5.17 (01-07-99) NSM-1

Updates:
1. Updated GSM-list
2. *4720# and #4720# (activate/deactivate Halfrate) doesn't work anymore!
3. New menu option: 4-4-6 Confirm SIM service actions Lets you select whether SIM service actions are visible and confirmed by you.
4. Automatic menu-language selection doesn't work anymore!

V 5.02 (02-02-99) NSM-1
V 4.13 NSM-1 (EFR option should be back in this version)
V 4.12 NSM-1 (EFR option removed in this version)
V 4.11 NSM-1 (EFR option removed in this version)
V 4.02 NSM-1

Nokia 6190

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#6190# shows the SW version.
*#92772689# (after removing the analog module) shows service menu.
*3001#12345[OK] to enter test mode.
*#639# to change NAM.

Nokia 7110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.
*#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: 4.77 25-01-00 NSE-5 - EFR and half rate codes do not work with this version.

V 4.76 13-01-00 NSE-5
V 4.75 07-01-00 NSE-5
V 4.73 15.11.99 NSE-5

Nokia 8850

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.

Latest software version: V 5.11 09-12-99 NSM-2

Older version: V5.08

Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#

Nokia 9110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version: v5.02 (26-08-99)RAE-2

V 4.05 RAE-2

Read more »

secret codes for Chines mobiles

China Mobiles Secret Codes
    access engineering mode:*110*01# (for repairing)
    factorymode: *#987#
    Restore factory settings: *#987*99#
    Software version : *#900# or *#800#

China Mobile secret codes | China mobile secret codes for language, software, display settings, user codes
1)Default user code : 1122, 3344, 1234, 5678
2)Engineer mode : *#110*01#
3)Factory mode : *#987#
4)Enable COM port : *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
5)Restore factory settings : *#987*99#
6)LCD contrast : *#369#
7)Software version : *#800#
8)Software version : *#900#
9)Set default language : *#0000# Send
10)Set English language : *#0044# Send
11)Set English language (new firmware) : *#001# Send
12)Default user code : 1122, 3344, 1234, 5678

More some codes for reset mobile china
*#77218114#
*#881188#
*#94267357#
*#19912006#
*#118811#
*#9426*357#

*#66*# Set Factory Mode CONFIRMED
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED

Read more »

Important secret codes for NEC mobiles

.:: NEC ::.
NEC db2000 *#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:
* # 3210 # (send?)
Network barring info : *#8140# (send?)
( it could harm your phone )
SIM lock it could harm your phone )
*#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]
Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]
Net Lock 2:
*#2220# (invio) - Inquiry * 2220 * password * password # (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]
Unlock subnetwork
*#1110# (send?) - inquiry * 1110 * password * password # (send?) lock
#1110* password # (send?) unlock
[password] [n� 8 cifre]
( it could harm your phone )

Read more »

Important secret codes for Acer mobiles

Acer V 750
*#400# Display Adc/ Set Cal-Value -
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code - [ Also reset Security Codes ! ]
*#330# (Execute not success) [ unknown ]
*#331# (Service deactivated) [ unknown ]
*#332# (Service unavailable)[ unknown ]
*#333# (Execute not success)[ unknown ]
*#351# (Service unavailable) [ unknown ]
*#360# (Invalid input)[ unknown ]
*#361# (Invalid input) [ unknown ]
*#362# (Invalid input) [ unknown ]
#363# (Invalid input) [ unknown ]

Read more »

All secret codes for Alcatel mobiles

Secret Codes

To view IMEI (International Mobile Equipment Identity) number enter *#06#

To Enter Service Menu enter: *#000000#

To view Secret Menu type 000000 then press *

Secret Menu Appears

TRACES channel indicator menus

ARRETS - ?

VIDER ARRETS Press OK and the phone responds: This action is executed!

CTRL CHARGE It show the charger voltage and battery voltage.

DAMIER display test

This is something that I got that I have yet to decipher.

IMEI 3300 1453 1139 420

When activated with a Telstra card the Phone boots up with:

"PRODUCT CODE"

"VAL. => OK"

Then we enter 025121992 OK

"ENTER SPECIAL CODE"

**05* same as Motorola

"UNBLOCKING"

" PUK ? "

10608CC2*. These two from Vodaphone also work 906081C2* 15900807*

"UNBLOCKING"

" PIN ? "

0000*

"UNBLOCKING"

"PIN AGAIN "

0000#

Alcatel Software Info UPDATED / NEW

Software releases

HC400 on the backside near the IMEI number is a sticker with a software release.

Alcatel have split the software releases

1.x No Cellbroadcast

5.x Cell broadcast

The newest software release of the HC 1000 is AK1 03

Alcatel HC600/800/1000 Pin-Out diagram

1 3 5 7 9

11 13 15

I I I I I I I I

O O 17

I I I I I I I I

2 4 6 8 10 12 14 16

1 Vbat_ext 9 SDA_E

2 EMMI_PAE 10 GND

3 Mic 11 GND

4 EMMI_OPE 12 DC_IN (charge)

5 GND 13 Speaker

6 EXT_EMET 14 MARCHE

7 SCL_E 15 DC_IN (charge)

8 EXT_RECDIT 16 GND

17 Antenna+internal switch (int/ext)

Software update, how?

I have been asked a lot about how to update the software in Cellular phones.

The easiest thing to do is to go to the nearest cellular

dealer and make him do it for you. Just remember that it is supposed to

be free (a receipt is requiet) so don't let him tell you anything else!

Removing SP lock on Alcatel Easy

This is how to remove the SP lock on Alcatel (one touch) Easy.

(You wil need a cable, a eeprom device and some sw)

Edit the eeprom:

Address Replace with

------------- ---------------

176h FFh

177h FFh

Alcatel One Touch Easy

To view IMEI (International Mobile Equipment Identity) number enter *#06#

To Enter Service Menu enter: *#000000#

To view Secret Menu type 000000 then press *

Secret Menu Appears

TRACES channel indicator menus

ARRETS - ?

VIDER ARRETS Press OK and the phone responds: This action is executed!

CTRL CHARGE It show the charger voltage and battery voltage.

DAMIER display test

This is something that I got that I have yet to decipher.

IMEI 3300 1453 1139 420

When activated with a Telstra card the Phone boots up with:

"PRODUCT CODE"

"VAL. => OK"

Then we enter 025121992 OK

"ENTER SPECIAL CODE"

**05* same as Motorola

"UNBLOCKING"

" PUK ? "

10608CC2*. These two from Vodaphone also work 906081C2* 15900807*

"UNBLOCKING"

" PIN ? "

0000*

"UNBLOCKING"

"PIN AGAIN "

0000#

It seems that I need to find out the PIN because at this point the phone reboots

I have got the info from a a guy somewhere on the net but I can't remember who so I can't give him the credit (sorry..) Write me if you are the one..

Removing SP lock on Alcatel Easy

This is how to remove the SP lock on Alcatel (one touch) Easy.

(You wil need a cable, a eeprom device and some sw)

Edit the eeprom:

Address Replace with

------------- ---------------

176h FFh

177h FFh

Unlock Generator for Alcatel phones

Here's a program that generates the lock/unlock codes for the

alcatel phones (One Touch Easy ..) NB. The program may not work with 203 & newer versions of the software.

Download: unlock.exe [~34 kb]

Instructions for unlock.exe

Once you enter your IMEI, you got 2 codes, ON, OFF plus phone type.

ON is the code for turning on the SIMLOCK. We don't wanna do that, right? :-) So let's go for the OFF code. This is supposed to be the one to remove the SIMLOCK, but it's incomplete, at least for the network providers here in Spain. This number, as you have seen, is in HEX format. I think it's a kind of universal code in which any netword provide add another fixed number (always the same) and the correct UNLOCK CODE is the sum of both of them. Let's see this in an example.

IMEI: 330020536226XXX

ON: 50453d90

OFF: 10453d90

Phone type: Alcatel HC800

Network provider: E MOVISTAR (214-07)

If we introduce the OFF code, the phone won't accept it. We have to add another number to this code. In Spain and for 214-07 (MoviStar) this is 9FDFFA. So we have to sum this numbers. The easier way is by loading the windows's calc, use the Hex mode and realize the sum

10453d90+9FDFFA=10E51D8A

10E51D8A is the right number. So we type this in our phone and ... the SIMLOCK is removed!

Alcatel One Touch Easy

To view IMEI (International Mobile Equipment Identity) number enter *#06#

To Enter Service Menu enter: *#000000#

To view Secret Menu type 000000 then press *

Secret Menu Appears

TRACES channel indicator menus

ARRETS - ?

VIDER ARRETS Press OK and the phone responds: This action is executed!

CTRL CHARGE It show the charger voltage and battery voltage.

DAMIER display test

This is something that I got that I have yet to decipher.

IMEI 3300 1453 1139 420

When activated with a Telstra card the Phone boots up with:

"PRODUCT CODE"

"VAL. => OK"

Then we enter 025121992 OK

"ENTER SPECIAL CODE"

**05* same as Motorola

"UNBLOCKING"

" PUK ? "

10608CC2*. These two from Vodaphone also work 906081C2* 15900807*

"UNBLOCKING"

" PIN ? "

0000*

"UNBLOCKING"

"PIN AGAIN "

0000# This is how to remove the SP lock on Alcatel (one touch) Easy.

(You wil need a cable, a eeprom device and some sw)

Edit the eeprom:

Address Replace with

------------- ---------------

176h FFh

177h FFh

Alcatel OTView

Here's the info how to unlock OTView, 100% working.

The Phone must be HD series, so the RETOFIT could work.

--------------------------------------------------------

1. Connect the phone to cable (phone must be OFF)

2. Start the RETROFIT software

3. Go to options, change Language to ENGLISH

4. Go to first left MENU, choose SWITCH ON

5. When the phone power up, choose CONNECT

6. You should see some weird lines on phone Display,

and that is normal, the phone is in TEST Mode.

7. Go to FLASH ACCESS from pull-down menu

8. Choose WRITING BY KEYBOARD INPUT

9. First adress 7e00, second adress 7eFF (start, end)

10. In Down window enter 16 rows(lines) of FF (FFFFFFFFFFFFFFFF - 16 FF's)

and in 17th line enter FFFF (4 ff's)

11. Press CTRL+ENTER

12. Go to first left menu, choose DISCONNECTION

13. Disconect the phone from cable.

14. Insert the SIM card into phone ...

15. The phone is unlocked and ready for ROCKING :)))))))

16. And the original IMEI is in phone :)

-------------------------------

Alcatel HE1 V3.0

On adress 00 to 0A change to 0000....that works 70%

works too on some v 301

afther that change contrast and backlight.

Alcatel DB Solution

You must edit Flash content and then:

on Adress/Line 122A, change all to 00

Read more »

Alcatel - Service Codes

Alcatel - Service Codes
For E Series:
Next codes work on alcatel E Series...
*#8273*# - Network Services
###847# - General reset
*7528*# - Simlock Flags
*#7253*# - Total call duration
*#7846*# - Reset to idle disabled...
*#7849*# - Reset to idle enabled
*#3377*# - Config as clam phone
*#2277*# - Config as bar phone
*#3646*# - Engineering module
*#7378*# - Reset informaions
*#6362*# - Free memory
*#3862*# - Test mode -- usually keypad..
*#4837*# - Internal vesion
*#3837*# - Version revision
Older Alcatel Models:
Enter Service Menu : *#000000#
View Secret Menu : 000000 and press *
To remove the security codes :
HD1,HE1 : 25228353
BE1,BE3 : 25228352
BE4,BE5 : 83227423
BG3.BH4 : 83227423
***.TH4 : 83227423
Init codes:
###847# Reset to factory defaults (danger...)
###337*07# Phone restart
Language selectors:
*#0000# Automatic
*#00xx# xx= 07,27,41,44,61,63,64,84,91,92,94 English
xx= 43,49 Deutsch
xx= 48 Polski
*#0420# Czech
*#0421# Slovak
-Lock/Unlock codes:
(ask your Provider for network codes... )
000000* Entering in Engineering Menu1 (with SIM)
###874# Reset to Factory Defaults (with SIM)
###765*02# Add Barring Groups
###765*05# Locking to Network
###765*07# Unlocking from Network
###765*08# Erase Network
###765*78# Deactivate Barring Groups

Read more »

Important secret codes for all Alcatel mobiles

*#06# Show IMEI & SW version
000000* Entering in Engineering Menu1 (with SIM)
###874# Reset to Factory Defaults (with SIM)
###765*02# Add Barring Groups
###765*05# Locking to Network
###765*07# Unlocking from Network
###765*08# Erase Network
###765*78# Deactivate Barring Groups
0123456789 Menu2 Code - BE4 Menu2 - turn long CALL in Maenu1

*#0048# Fast change language (Polish)
*#0049# Fast change language (Deutsch)
from fasher1

Read more »

Important secret codes for Motorola mobiles

Motorola L6:
------------
hold * 65512890 for reset
hold * 5806 sw version
hold * 487989 NS lock menu
hold * 482896 CP
hold * 574243 NS
hold * 967678 SP
hold * 362628 IMSI
hold * 787090 Lock net level
hold * 787292 Lock net level

Reset L7 security code without any cable
---------------------------------------
press menu button enter 6 time 0 and then press ok

*#06# IMEI
in permament test mode
(* hold 2 sec)
***113*1*[OK] net monitor
T205/T19x (ACER)
*#300# OK List the Software and Hardware version
*#301# OK Full Keypads functional Test
*#303# OK Set Default Language to English
*#304# OK Set OFF engineering mode
#304*19980722# OK Set ON engineering mode
*#305# OK Location: 1 OK
*#307# OK Engineering Test Mode
*#311# OK Phone code changed to default code
*#400# OK ADC, Cal val*
*#402# OK Adjust Display Intensity / Contrast
*#403# OK List the Manufacturing Informations
19980722 OK Master Unlock code for Phone and Sim Lock
*#302# OK Acoustic test*
7.1 Greeting
7.2 Main VlmGain
7.3 Input Cal
7.4 Output Cal
7.5 Side In Gain
7.6 Vox Gain
7.7 Min Mic Engy
7.8 More
(a) In Vlm Gain
(b) Aux Vlm Gain
(c) Silence Prd
(d) Supp Prd
(e) In Volume
(f) Out Volume
(g) Icon
(h) Image
(i) Animation
*3370# EFR ON (enhanced full rate)
#3370# ERF OFF
*#72837726# OK Confirm ?, Data saver
1234 OK Phone code default
*#0000# OK Setting saved, restore set phone do default language
*#0048# OK Fast change polish langpack
*#0007# OK Fast change russian langpack

MOTOROLA 3xx
*#06# and quick 'menu-key' and 048263* (Push the key quickly!)
and entering at field "OPTCODE" you must try several times.
If not working try with MOTO TEST CARD inserted.
Security code - 32*118*1*0*0
Model - 32*279*1*0*8
Flex ver - 32*383*1*0*0
Master Reset - 18*0
Master Clear - 18*1
Set band GSM 900 - 10*0*3
Set band DCS 1800 - 10*0*4
Set band PCS 1900 - 10*0*5
Set dual band GSM 900/1800 - 10*0*6
Read band - 10*1*0 => 3-GSM, 4-DCS, 5-PCS, 6-GSM/DCS
User code - 32*116*1*0*0 /coded:00310032003300340000 - 1234/
Read imei - 32*4*1*0*0 "OK" /coded:083a05092700247709 - 350907200427799/
47*4*1*0*9*081A32547698103254 => IMEI=123456789012345
it is possible to change IMEI

Read more »

Samsung SGH 600 Secret Codes

Show IMEI : *#06#

Show Software Version : *#9999#

Show Software Version (instructions) : *#0837#

Show Serial Parameters : *#0001#

Activates the smiley when charging : *#9125#

Battery status (capacity, voltage, temperature) : *#9998*228#

Program status : *#9998*246#

Change Alarm Buzzer Frequency : *#9998*289#

Debug screens : *#9998*324#

Watchdog : *#9998*364#

EEPROM Error Stack - Use side keys to select values. Cancel and ok : *#9998*377#

Trace Watchdog : *#9998*427#

Change LCD contrast : *#9998*523#

Jig detect : *#9998*544#

Memory status : *#9998*636#

SIM File Size : *#9998*746#

SIM Service Table : *#9998*778#

RTK (Run Time Kernel) errors : *#9998*785#

Run, Last UP, Last DOWN : *#9998*786#

Software Version : *#9998*837#

Test Vibrator - Flash the screenligth during 10 seconds and vibration activated : *#9998*842#

Vocoder Reg - Normal, Earphone or car kit can be selected : *#9998*862#

Diag : *#9998*872#

Reset On Fatal Error : *#9998*947#

Last/Chk : *#9998*999#

Yann debug screen : *#9998*9266#

Software version : *#9998*9999#

Changes serial parameters (s=?, f=0,1, t=0,1) : *0001*s*f*t#

Read more »

Samsung D-Series Secret Codes

Tips, Tricks and Secret Codes for the Samsung D820, Samsung D900, and other Samsung phones with similar firmware.

#*22671* - Starts the phone recording in the background. It can record up to an hour, secretly. Press #*22672*

Holding the volume button when the screen is off displays a short summary of information. Time, Date, signal, missed calls, etc...

Enter code *#1234# to display Firmware version of the phone

Example : D900XAFG6

D900 = model

XA = Region / Country

F = Year (2006)

G = Month (July)

6 = Firmware Release in month (so this is the 6th revision)

Hold down # to mute, or unmute the phone.

Press 1 while watching a video to make it full screen.

While playing a song in music player u can highlight a part of the song to be repeated over, while listening to the song press 7 at the point u want repeated then press 7 again at the end of the section and it will loop the section between the the two presses of 7

If you need to send a photo via mms and its too big to send and u have no pc available to downsize the pic (my limit is 100kb via mms with my sim) open the photo in photo editor on the phone and "save as" rename it differently from the original and u will have two copys of the pic and the edited version will be under 100kb.

Hidden Menu: *#8999*8378#

Make MP3 sound louder:

1. hit: *#8999*8378#

2. hit: 2, and then 2 again.

3. then on IIS NORMAL (or hit 9)

4. then on "Rx vol."

5. for level 10, click 0

then save

Orignals are:

level 10 = 10

level 9 = 18

Make sound setting louder when som1s calling:

1. *#8999*8378#

2. 2 times 2

3. 1 (NORMAL)

4. then on "Rx vol."

5. level 5 type 140 instead of 120

Read more »

NOKIA SERIES 60 secret codes

NOKIA SERIES 60

Nokia 6210//7110/8810/2110/
1610/1611, 2010, 3210, 3810, 6080/6081, 6120/6160/6162, 6150, 6190, 7110, 8850, 9000/9000i, 9110/5110/5610/9000
Nokia 1610 /1611/6110/7710i/8110/9000/

*#92702689# Service menu

1. Side IMEI 2. Side Manufacture date 3. Side Purchase date 4. Side Last Reparatur/Upgrade 5. Side Transfer user DATA

*#746025625# Test mode activate
_________

________

Nokia 7110 Secret codes
*#06# For checking the IMEI (International Mobile Equipment Identity)

*#0000# To view Software Version.

*#3370# Enhanced Full Rate Codec (EFR) activation. It will automatically restart.

*#3370* Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.

*#4720# Half Rate Codec activation. It will automatically restart

*#4720* Half Rate Codec deactivation. It will automatically restart

*#746025625# Sim clock allowed status

*#92702689# [*#war0anty#] Takes you to a secret menu with 6 choices

1. Displays Serial Number. 2. Displays the Month and Year of Manufacture (0997) 3. Displays (if there) the date where the phone was purchased (MMYY) 4. Displays the date of the last repairment - if found (0000) 5. makes you capebel of transferring user data if you have the gear for it 6. shows how many hours the phone has been on
__________

General 8810 Secrets/Codes
IMEI number
*#06#

Software Version
*#0000#


1st Line - Software Version
2nd Line - Date of Software release
3rd Line - Phone Type.

Serial Number
*#92702689#

1st Screen - Date of phone manufacture
2nd Screen - Serial #, IMEI

_________
Nokia 1610/1611, 2010, 3210, 3810, 6080/6081, 6120/6160/6162, 6150, 6190, 7110, 8850, 9000/9000i, 9110
Nokia 1610 / 1611

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#170602112302# shows the SW version.

Latest software version on Nokia 1610: v 5.15 (25.02.97) NHE-5NX - older version V 4.19
Latest software version on Nokia 1611: V 4.03 NHE-5SX

Nokia 2010

To view IMEI number *#06#
To view Software Version enter *#9999#

Nokia 3210

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP


TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

*#0000# To view Software Version.

#746025625# [*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: V 5.02 NSE-8/9

V.4.41 NSE-8/9 (17-08-99)0
V 4.11 (???)
V 3.10 NSE-8

*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Nokia 3810

To view IMEI number *#06#
To view Software Version enter *#3810#

Nokia 6080 / 6081

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version on 6080 V 4.80 NHE-2
Latest software version on 6081 V 5.14 NHE-2A

Nokia 6120 / 6160 / 6162 (TDMA phones)

*#92772689# for checking ISDN number.
*3001#12345# for field test mode and nam selection and some other stuff...
*#9999# shows the SW version.

Nokia 6150

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#92702689# to enter service menu.

Latest software version 5.22 (10-11-99) NSM-1

Older versions:
5.20 (20-09-99) NSM-1
5.17 (01-07-99) NSM-1

Updates:
1. Updated GSM-list
2. *4720# and #4720# (activate/deactivate Halfrate) doesn't work anymore!
3. New menu option: 4-4-6 Confirm SIM service actions Lets you select whether SIM service actions are visible and confirmed by you.
4. Automatic menu-language selection doesn't work anymore!

V 5.02 (02-02-99) NSM-1
V 4.13 NSM-1 (EFR option should be back in this version)
V 4.12 NSM-1 (EFR option removed in this version)
V 4.11 NSM-1 (EFR option removed in this version)
V 4.02 NSM-1

Nokia 6190

*#06# for checking the IMEI (International Mobile ...

Read more »

NOKIA SERIES 40 secret code

NOKIA SERIES 40
Nokia 3310/3330/2110i/

(International Mobile Equipment Identity)

*#7780# Restores Factory Settings..(Memory, language, counters not included)

*#3110# For checking the phone's software (SW) - called firmware revision information.

*#746025625# [*#sim0clock#] To check if the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#] Phone asks 'warranty code:'

6232 (OK) Displays the Month and Year of Manufacture

9268 (OK) Displays Serial Number

7332 (OK) Displays the date of the last repairment - if found

7832 (OK) Displays (if found) the date where the phone was purchased

37832 (OK) Set the Purchasing Date MMYY (This date can be set only once!)

87267 (OK) Transfers ALL phone numbers, Logo's, and ringtones from other gsm phones
____________

Nokia 3330 Secret codes

*#06# To find IMEI (International Mobile Equipment Identity)

* # 0000 # bzw.*#9999 # and/or * # 3330 # Software-Version

*#170602112302# Firmware version

* # 92702689 # (* # war0anty #) Service menu

Equipment inquires "warranty code"

6232 (OK) Displays the Month and Year of Manufacture

9268 (OK) Displays Serial Number

7332 (OK) Displays the date of the last repairment - if found

7832 (OK) Displays (if found) the date where the phone was purchased

37832 (OK) Set the Purchasing Date MMYY (This date can be set only once!)

87267 (OK) Transfers ALL phone numbers, Logo's, and ringtones from other gsm phones

SIM Clock stop * # 746025625 # (* # sim0clock #) Functioned with all firmware designs and it does not indicate whether SIM Clock can be stopped. SIM Clock steers Standby mode.

_________

Nokia 2110i
*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP


TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

To view Week and Year of manufacture enter *#3283# [*# D A T E #]

The last two digits are the year. If the year is 95, the first two digits are the month. For 96 the first two digits are the week of the year.

To view the software version on 2110e / 2110i enter *#170602112302# or *#9999#
On newer phones, the code has been changed to *#682371158412125#

Service Prover Lock
The service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for upto 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)

The main code used in Nokia phones is:
#pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Country-Lock status
#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSS
W = PRESS "*" THREE TIMES
P = PRESS "*" FOUR TIMES
+ = PRESS "*" TWO TIMES
MASTERCODE = 1234567890
Y = NUMBER 1 TO 4

(master code) is a 10 digit code, based on the phones IMEI number.
(I can NOT give you the master code - SO DON'T ASK ME FOR IT !!!!!!!)

Eg. To remove restriction on lock 1 type following code:
#pw+(master code)+1#
If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eg. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#

Please NOTE that these codes could be used with care! A user told me that it's only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

Bypass the SP lock
With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass the SP lock like this:
1: Insert sim card of diferent provider.
2: Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE?
3: Press the "C" key.
4: Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#


The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card is accepted until you restart the phone again. NOTE: On version 5.04 Nokia has removed this option !

Cell-sites
To enable display of cell-site names, [MENU] 4 9 1

Received calls
To see received calls. Same As menu options (012)
Enter : * then Memory then Find or * then the down arrow Missed calls

To see missed calls
Same as menu option (01 3)
Enter : + then Memory then Find or + then the down arrow

DTMF tones
Pressing Menu, then Green Phonebutton allows you to transmitt DTMF tones
...

Read more »